Description
DETAILS:
Ornamental Design: The bottle and topper are 3D printed. The bottle has a dusting of gold paint while the eyes on the topper are painted gold to match. The MOC insignia decal is applied to the front and back of the bottle; a smaller decal is applied to the token to be placed around the bottle’s neck. Topper, bottle, and token are clear coated to ensure quality. A antique brass chain is threaded through the holes around the bottle neck, spotlighting the MOC token.
Nightlight Design: The nightlight design features a controllable light source inside with built in fan, ventilation holes, and a transparent filament allowing light through. (Transparency of filament will vary slightly between pictures and product due to using our new 3DPS custom-made filament.) The design is slightly larger than the Ornamental designs (respectively) to allow enough room for the LED lamp fixture to fit inside properly. It also features your choice of (3) different remote controls; each has their own unique features:
-
- Standard Remote – Uses a (RF) Radio Frequency remote controller (requires 3V battery) to turn the nightlight on/off and adjust the brightness levels. There are several buttons to choose the level from or just choose + or – to vary the level. Other buttons include Mode buttons which will allow you to strobe, fade and blink the LEDs. (Functions may vary depending on which controller we have in stock)
- Wi-Fi Remote (2.4 GHZ Wi-Fi) – The Wi-fi option does not come with a controller, however uses a smart phone app, Magic Home Pro, for control. It is quick to install the app and gives you lots of functions for the nightlight. Of course there is On/Off and varied illumination intensities but also a timer and delay to turn off. (3DPS has does not control or have any affiliation with the Magic Home Pro app and may include less or more functions then discussed here)
- Touch Remote – Give you a 2.4GHz RF “touch” remote control (requires 3V battery) for turning on and off the nightlight and as with the other controls you carry adjust the LEDs intensity with the touch of the controller. It also features a mode button to blink the LEDs and a separate speed and brightness button specifically for when you enable the mode button. This controller is a bit larger and a carry cradle can be attached to flat surface to hold the controller so you always know where it is.
The Nightlight bottles were printed using transparent black filament to allow for the LED light to shine through more clearly. (Transparency of filament will vary slightly between pictures and product due to using our new 3DPS custom-made filament.) Next we made a removeable bottom to install (2) super bright COB (Chip On Board) LED’s inside along with a very quiet Hydraulic Bearing Cooling Fan. The COB LEDs are very powerful, bright and warm; so we installed a quiet cooling fan to help dissipate this heat. The cooling fan is so quiet that it can’t be heard standing next to the product, no worries about noise. The bottle is raised up off the ground slightly with 4 rubber feet as to allow air circulation through the bottom of the bottle as that is where the fan inlet is located. To assist with this, we incorporated air vents under the wings, for less visibility, that allow excess heat out and continuous airflow. To finish it off, we added some bottom weight to reinforce stability for those who have pets that knock everything over.
INCLUDED: - (1) Murder of Crows Vigor Bottle (Ornamental or Nightlight Design) - (1) Ornamental Design - Murder of Crows Vigor Bottle with Topper Or - (1) Nightlight Design - Murder of Crows Vigor Bottle (Top not removeable) - Nightlight Bottle - LED Controller (as Chosen) - 120V to 12V DC Adapter - (1) Antique Brass chain with insignia token
DIMENSIONS:
Ornamental Design
Medium
11 in H x 6.5 in W x 3.5 in D | 279.4 mm H x 165.1 mm W x 88.9 mm D
Large
13.7 in H x 8 in W x 4.5 in D | 349.2 mm H x 203.2 mm W x 114.3 mm D
Nightlight Design
Medium
11.75 in H x 6.75 in W x 3.875 in D | 298.4 mm H x 171.4 mm W x 98.4 mm D
Large
14 in H x 8.25 in W x 4.625 in D | 355.6 mm H x 209.5 mm W x 117.4 mm D
NOTE: This is not an official product; we do not have any affiliation with the creators of Bioshock. The product is meant to artistically resemble the actual item as a 3D-printed artwork, not to copy it’s original design.
NOTE: Due to the handmade nature of this product, there may be slight variations in color and/or craftsmanship.
NOTE: This product was not designed to hold liquids or foods.
